9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2194002.png)
2. Fit the gyro sensor to the bracket.
Use a large screwdriver to prise aside the air duct slightly to access the left-hand screw.
Important: Fit the gyro sensor with the connector and arrow pointing forward in the car.
Tightening torque up to and including Vehicle Identification Number 73514907:
10 Nm (7 ft. lbs.)
Tightening torque from and including Vehicle Identification Number 73514908:
8 Nm (6 ft. lbs.)
When processing the data for the 2003 and 2004, the torque specification shown below was given, when processing the 2005 data, the
specification above (including VIN Split) was shown.
-
Tightening torque 5 Nm (3,5 ft. lbs.)
3. Manual gearbox: Fit the gear lever housing.
Automatic transmission: Fit the selector lever housing.
4. Fit the centre console.
