9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
12. Remove the dipstick and the pipe going to the thermostat.
13. Remove the thermostat and thermostat housing.
To fit
Warning: Be careful if the car is warm. The coolant is hot and there is a risk of burns from the intake manifold.
1. Check and clean the sealing surfaces.
2. Fit a new O-ring to the thermostat and its connecting pipe. Coat the O-ring with a little non-acidic Vaseline to facilitate assembly.
3. Fit the thermostat and its connecting pipe.
Tightening torques:
Thermostat: 20 Nm (14.7 ft. lbs.)
4. Fit the dipstick.
5. Fit the turbo intake pipe. Also fit the turbo bypass pipe and the crankcase breather pipe connection.
Tightening torques: