saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9172 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9170
Page 24
background image

17.

From M05 inclusive: Fit the fan control module and make a point of routing the wiring under the clip for the filter cover.

Tightening torque 1.4 Nm (1 lbf-ft)

Fit the large connector to the fan control unit.

18.

Fit a new foam seal around the fan housing.

19.

Fit and connect the wiring harness, and where appropriate, where the cables to the stepping motors are already marked with tape, the following
applies:

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9172 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9170