saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 9325 > < Procedures|Page 9323
Page 5
background image

Lift the cover to one side and remove it.

18. Lift up the ventilation fan, cut the cable tie and unplug the ventilation fan connector.

19. Pull up the wiring harness including rubber seal and cut the cable tie.

NOTE:  Make a note of the position of the wiring harness.

20. Press down the wiring harness on the other side, including the rubber seal.

21. Remove the ventilation fan control, 2 bolts.

To Fit

Procedures|Page 9325 > < Procedures|Page 9323