saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9727 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9725

9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)

Page 13
background image

19.

Fit and connect the wiring harness, and where appropriate, where the cables to the stepping motors are already marked with tape, the following
applies:

Stepping motor distribution, blue tape

Blend Stepping motor, left-hand side, brown tape

Blend Stepping motor, right-hand side, red tape

20.

Up to VIN 43003168 inclusive: Carefully make holes using the temperature sensors and position them. Secure the wiring harness with cable ties.

From VIN 43003169 inclusive: Remove the plug on the air duct. Fit the temperature sensors by twisting and pressing them in. Secure the wiring
harness with cable ties.

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9727 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9725