saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9748 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9746
Page 4
background image

7.

From M05 inclusive: Remove the large connector for the fan control unit on the passenger side.

Remove the fan control unit on the passenger side by removing the 2 screws.

8.

Remove the 4 screws and the 2 clips and remove the fan housing.

9.

Up to VIN 43003168 inclusive: Make a note and mark which connector is connected to which stepping motor. In some cases the cables are
already marked, see To fit. Mark up on which side each temperature sensor is located. The temperature sensors must not be mixed up when fitting.

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9748 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9746