9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2544005.png)
From VIN 43003169 inclusive: Make a note and mark which connector is connected to which stepping motor. In some cases the cables are already
marked, see To fit. Mark up on which side each temperature sensor is located. The temperature sensors are removed by twisting them and they
must not be mixed up when fitting.
10.
Unplug the wiring harness and cut the cable ties. Remove the wiring harness.
Note
Up to VIN 43003168 inclusive: Take care that the catches holding the temperature sensors do not break.
11.
Remove the 3 screws from the cover and remove the cover.
12.
Carefully open the clasp securing the control rod to the rear air distribution valve.
13.
Remove the control rod from the rear air distribution valve.
14.
Remove the gear with clip.
Note
The gear shall not be used with fitting.
15.
Remove the 8 air distributor housing screws.
