saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9753 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9751

9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)

Page 9
background image

4.

Fit the new cover with the 4 screws at the rear air distribution valve. Start with the upper rear screw, then with the lower rear screw.

Tightening torque 1.4 Nm (1 lbf-ft)

NOTE

Make sure that the air shield on the heat exchanger housing is set against the seal (certain models) and the guide inside the evaporator casing
when the heat exchanger housing is fitted.

5.

Fit the new heat exchanger housing onto the evaporator casing and fit the 4 screws and the 2 clips to the front and right-hand side of the heat
exchanger housing.

Tighten torque 1.4 Nm (1 lbf-ft).

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9753 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9751