9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2544012.png)
Tightening torque 1.4 Nm (1 lbf-ft)
16.
Up to M04 inclusive: Fit the fan control module and route the wiring up under the clasp. Where applicable, fit the water barrier.
Where appropriate, fit the temperature sensor connector to the plate and fit the plate to the heat exchanger housing. Make sure to guide the rubber
grommet into the plate.
17.
From M05 inclusive: Fit the fan control module and make a point of routing the wiring under the clip for the filter cover.
Tightening torque 1.4 Nm (1 lbf-ft)
Fit the large connector to the fan control unit.
18.
Fit a new foam seal around the fan housing.
