9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2544015.png)
6.
Up to M04 inclusive: Remove the plate holding the connectors on the passenger side. For models with temperature sensor, remove the temperature
sensors connector from the plate. The connector's wiring harness enters the heating and ventilation unit via a rubber grommet.
Remove the fan control unit on the driver's side. For models with a transparent water barrier in front of the fan control module, this must be
removed first.
7.
From M05 inclusive: Remove the large connector for the fan control unit on the passenger side.
Remove the fan control unit on the passenger side by removing the 2 screws.
8.
Remove the 4 screws and the 2 clips and remove the fan housing.