saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 9970 > < Procedures|Page 9968
Page 3
background image

4. Fit the radio section (A) and the ACC control panel (B).
5. Refit the cables for the floor lighting and fit the data link connector, 2 screws.

6. Fit the lower part of the panel on the driver's side, 3 screws.

NOTE:  New leads must be routed when refitting. Fasten the new leads to the original wiring harness.

Blended-Air Temperature Sensor, RH

Blended-Air Temperature Sensor, RH

To remove

Procedures|Page 9970 > < Procedures|Page 9968