9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
Evaporator Temperature Sensor / Switch: Removal and Replacement
Evaporator temperature sensor
To remove
1. Remove the glove box.
Remove the trim from the side of the centre console.
2. Cut the cable tie holding the wire harness to the service cover. Also cut the cable tie holding the cooler hose to the glove box.
Remove the service cover.
3. Remove the fresh-air filter.
4. Put a hand into the filter holder and carefully pull out the temperature sensor from the evaporator.