saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 2938 > < Procedures|Page 2936
Page 4
background image

6. Adjust the oil level in the compressor
7. Mount the pipe on the compressor.

Tightening torque: 20 Nm (15 lbf ft)

8. Lower the car to the floor.
9. Evacuate the A/C system and refill with refrigerant.

Compressor Low-Pressure Pipe

Compressor Low-Pressure Pipe (V6)

The compressor's low-pressure pipe runs from the expansion valve via a joint to the compressor.

IMPORTANT

Be careful not to contaminate the expansion valve.

To remove

1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.

Procedures|Page 2938 > < Procedures|Page 2936