9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
Hose/Line HVAC: Removal and Replacement
Compressor High-Pressure Pipe
Compressor High-pressure Pipe (V6)
To remove
1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.
3. Detach the high-pressure hose from the compressor and plug the openings. Raise the car.
4. Detach the pipe from the receiver and plug the openings.
IMPORTANT: If the desiccant container has been open for more than 15 minutes in total, it should be changed.
5. Loosen the pipe from the holder on the subframe and remove it.
To fit
NOTE: Insert the high-pressure pipe in the engine bay from the left side.