9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
IMPORTANT: Be careful not to contaminate the expansion valve.
To remove
1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.
3. Remove the RH grille by pressing both clips inward with a screwdriver. Then pull the side grille outwards and lift it out.
4. Remove the RH headlamp and direction indicator.
5. Detach the inlet hose with mass air flow sensor without unplugging the contact and place it to one side.
6. Detach the high-pressure pipe from the compressor and place it to one side.