9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
Plug the openings.
7. Detach the front end of the low-pressure pipe from the compressor.
Plug the openings.
8. Detach the low-pressure pipe from the joint block on the RH structural member. Plug the openings.
9. Remove the low-pressure pipe.
First, pull it down from the compressor under the car and then up.
NOTE: Make a note of how the pipe is positioned before removing it.
10. Loosen and push aside the power-steering oil container.
11. Detach the rear end of the low-pressure pipe from the expansion valve.
Plug the openings.
12. Loosen the pipe from the holders on the structural member.
13. Carefully lift out the low-pressure pipe.
To fit