saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Before Changing A Control Module|Page 4105 > < Before Changing A Control Module|Page 4103
Page 2
background image

1. Fit the control module in place.
2. Screw tight with 2 screws.
3. Plug in the connector to the control module.

4. Refit the fuse cover.
5. Refit the lower panel.
6. After the DICE control module is replaced, it must be programmed into the car.

Before Changing A Control Module|Page 4105 > < Before Changing A Control Module|Page 4103