9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-1087002.png)
9. Undo the control module's 2 retaining nuts and remove them. A 10 mm magnetic socket will be useful for this.
10. Lift the control module straight up.
IMPORTANT:
ESD-SENSITIVE COMPONENT
Earth yourself by touching the car body before plugging in/unplugging components. Do not touch the component pins. Read Before changing a control
module before changing a control module.
To fit
1. Position the control module from above.
2. Fit the 2 control module retaining nuts.
3. Spray the control module multiconnector with Kontakt 61 (part no. 30 04 520) and plug in the connector.
4. Fit the protective cover on the control module.
5. Fit the windscreen cover. Be careful with the bonnet release wire on the lefthand side.
6. Fit the rubber seal.
