saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < Before Control Module Replacement|Page 4170
Page 3
background image

7. Fasten the screw clips on the ends of the windscreen cover.
8. Fit the rubber wiper spindle seals.
9. Fit the nuts on the wiper spindles with the blanking-off washers on the nuts.

10. Perform Measures after changing a control module.
11. Reset immobilization as follows:

-

Connect Tech2 and turn the ignition to ON

-

Select Body and TWICE

-

elect Immobilization. After 10 seconds the immobilizer is programmed.

Main Relay (Computer/Fuel System) > < Before Control Module Replacement|Page 4170