saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1186 > < Initial Inspection and Diagnostic Overview|Page 1184
Page 9
background image

1.D. Press in the catch on the wire clamp and tip the wire forward.

Plug in the connector and lock it by raising the wire clamp.

NOTE:  Make sure the wire clamp is locked in the correct position, to ensure good contact in the connector.

1.E. Raise the catch to release the connector.

Make sure the connector is securely locked when plugged back in.

Initial Inspection and Diagnostic Overview|Page 1186 > < Initial Inspection and Diagnostic Overview|Page 1184