saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Generator Replacement|Page 8317 > < Alternator|Specifications|Page 8314
Page 1
background image

Alternator: Service and Repair
Generator Replacement

Removal

1. Remove the negative battery cable.

IMPORTANT:  Make a note of the belt's direction of rotation. The belt must be refitted for the same direction of rotation as previously.

2. Relieve the tension on the belt tensioner and unhook the multigroove V-belt.
3. Remove the generator air intake by pulling it straight up.
4. Remove the belt tensioner.
5. Raise the car.
6. Remove the front right wheel.
7. Remove the drive belt cover.

8. Remove the engine oil pressure sensor and plug the hole.

Generator Replacement|Page 8317 > < Alternator|Specifications|Page 8314