9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
![background image](/saab/9-5_sport_wagon_(9600)/v6-3.0l_turbo_(b308)/Page-2252009.png)
1. Make sure the component or lead being tested is not carrying a current (e.g. by removing the associated fuse).
2. Set the multimeter to resistance measurement and connect it across the component/lead being tested.
3. Move the wiring harness in question while observing the ohmmeter.
The resistance of the wiring harness should normally be less than 1 ohm. A specified value applies to components.
Checking for short circuits to ground