9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-2331007.png)
Re-assembly
1. Position the pipe, starting from the rear.
6 cyl. petrol: Transfer the heat shield from the old pressure hose to the new hose.
2. Remove the rear transit protection and screw by hand the banjo nipple into place with new seals.
3. Remove the front transport protection and lightly screw together the front pipe union.
Note: Be careful with the O ring.
4. Fit the rear clamp to the steering gear.
RHD
