saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Longitudinal Link|Page 8949 > < Front Steering Knuckle|Description and Operation|Page 8944
Page 1
background image

Rear Knuckle: Service and Repair
Longitudinal Link

Longitudinal Link

Removal

1. Raise the car and remove the wheel.
2. Press the brake piston back using a pair of slip joint pliers.

3. Remove the brake caliper and hang it up.
4. Remove the air deflector.

5. Remove the bolt securing the Handbrake cable bracket.
6. Unplug the connector from the wheel sensors
7. Detach the wheel sensor cable from the holder.
8. Remove the nuts from the wheel sensor cable mounting and the brake pipe.
9. Remove the damper's lower retaining bolt.

Longitudinal Link|Page 8949 > < Front Steering Knuckle|Description and Operation|Page 8944