9-5 Sport Wagon (9600) V6-3.0L Turbo (B308) (2003)
/v6-3.0l_turbo_(b308)/Page-1785002.png)
Fitting
1. Tap on the new seal with drift 83 90 122. Lubricate the seal with transmission fluid
2. Fit Protective collar 83 95 162 in the sealing ring.
3. Make sure that the drive shaft is clean and then align it with the tool.
Important: Insert all but approximately 20 mm of the drive shaft into the transmission and withdraw the tool before the shaft's sealing surface
reaches the shaft seal.
