saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Body - Stain/Film On Inside Perimeter Of Windshield|Page 15588 > < Body - Stain/Film On Inside Perimeter Of Windshield|Page 15586
Page 12
background image

11. Secure the windscreen with tape or straps so that it is held against the edge of the roof.

IMPORTANT:  There must be no strain on the windscreen.

12. Reset the glue gun.
13. Allow the adhesive to cure before continuing. Betaseal X 2500 cures in 1 hour at 23 degrees C and 50% relative humidity.
14. Fit the lower portion of the A-pillar trim into place. Fit the upper clip with the strap down in the trim. Press the trim into all clips. Check the fit of

the door weatherstrip.

Body - Stain/Film On Inside Perimeter Of Windshield|Page 15588 > < Body - Stain/Film On Inside Perimeter Of Windshield|Page 15586