9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
1
Raise the car and remove the left front wheel.
2
Dismantle the front part of the fender liner in the left front wheel housing.
3
Release 1 nut and 1 screw holding the siren.
4
Unplug the connector and remove the siren.
To fit
1
Fit in reverse order.
Stamping the campaign plate
After taking these measures, box A3 on the campaign plate must be marked. Mark the box with a numeral "8" (Saab Special Tool P/N 02 97 713). If
needed, order this special tool directly from Kent-Moore at 1-800-345-2233.
Warranty/Time information:
See separate information.
Customer Satisfaction Campaign 484: Replacing the anti-theft alarm siren
Background
An internal fault within the anti-theft system siren can cause the siren to become inoperative and set a"CHECK THEFT ALARM" on the Saab