saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Cross-Member|Specifications|Page 9885 > < Rear Cross-Member|Specifications
Page 1
background image

Rear Cross-Member: Service and Repair

To remove

1. Raise the car and remove the rear wheels.
2. Unhook the exhaust system's rear and center rubber hangers. Hang up the exhaust system so that it does not put too much a strain on the front

rubber hangers and flexible section.

3. Unbolt the lower transverse link from the longitudinal link on both sides of the car.
4. Unbolt the upper transverse link from the longitudinal link on both sides of the car.

Rear Cross-Member|Specifications|Page 9885 > < Rear Cross-Member|Specifications