9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
Clutch Switch: Service and Repair
Clutch Pedal Switch
To remove
1
Remove the pedal bracket's cover by undoing the 3 screws and clip. Bend the cover down and carefully withdraw it. Mind the leads running to the
data link connector and the wiring for the lighting.
2
Depress the clutch pedal.
3
Extract the switch's red sleeve until it clicks.
4
Remove the switch by pressing in the catches with an electrician's screwdriver or the like.
5
When the switch has been removed, unplug the connector.
To fit
1
Spray the connector with Kontakt 61 contact cleaner (part No. 30 21 763).
2
Make sure that the switch is fully withdrawn.
3
Depress the clutch pedal and press the switch into its holder.
4
Carefully release the pedal.
5
Plug in the connector.
6
Fit the pedal bracket's cover in reverse order.