9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
below 5 km/h.
When the function is reset, "x x x" km (miles) appears on the SID unit display. The distance then shown (DTE) is calculated internally using the value of
11/10 km.
FUEL (Average Fuel Consumption)
The average fuel consumption is calculated using the following information:
^
Fuel consumed since starting, unit ml (bus information from Trionic).
^
Odometer reading, unit km, miles (bus information from MIU).
The display range is 0 to 99.9 litres/100 km, MPG Imp or MPG.
The calculated value is updated every 4 seconds from the last manual memory reset. Every 500 km, both the distance and the fuel consumption are
divided by 2 so that the value is not influenced too much by "old" consumption figures.
On zeroizing, both parameters are set to 0, "- - -" appears on the display. When a distance of 100 m has been covered, a new figure will be shown.
SPD (average speed), SID 1
The average speed is calculated using the time information (clock) and the following information:
^
Odometer reading, unit km, miles (bus information from MIU).
^
Speed, km/h, mph (bus information from MIU).
The display range is 0 to 250 km/h (0-155 mph) and the reading is updated every 4 seconds from the previous reset.