9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
^
Then check all sensor inputs and signals from other systems.
^
Finally, check the control module outputs. Remember that the test readings do not indicate whether or not the actuator is in working order.
^
If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components which ought to be checked more thoroughly.
^
The test readings given apply to a calibrated Fluke 88/97.
^
The test readings show the signal's pulse ratio and pulse width. A test instrument with pulse ratio and pulse width measurement must be used. The
sign indicates a positive trigger pulse, TRIG+.