9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
Fuel Filler Hose: Service and Repair
WARNING
Removal of the fuel tiller pipe involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with
this work:
-
Work only in a well-ventilated area. If approved equipment for the extraction of fuel vapor is available, be sure to use it.
-
Wear suitable gloves. Prolonged contact with fuel can cause skin irritation or dermatitis.
-
Keep a class BE fire extinguisher near at hand. Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting
leads in electrical circuits.
-
No smoking anywhere in the vicinity,
-
Wear protective goggles.
To remove
1
Make sure the tank is not more than 3/4 full.
2
Raise the car and remove the right-hand rear wheel.
3
Remove the wing edging strip and the wing liner. The wing edging strip must be removed first.
4
Undo the hose clips on the filler pipe and separate the purge pipe with the tool, part no. 83 95 261.