9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
2
Spray the connector with Kontakt 61 contact cleaner (part No. 30 21 763), assemble the connector halves and fit same in the holder.
3
Secure the wiring with the retaining clip. Take care to ensure that the wiring is not pinched or damaged by the clip.
4
Press in the sensor and screw it in place with the O-ring fitted together with the heat shield. Check that the O-ring is correctly positioned so that the
sensor bottoms in the engine block, as there is otherwise a risk of the sensor's mounting lug breaking off.
5
Apply Molykote 1000 (part No. 30 20 271) or the equivalent to the retaining bolt for the manifold's heat shield and fit the heat shield in place.
6
Start the engine and check for leaks.
Tightening torque 50 Nm (36 lbf ft)