saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 8254 > < Procedures|Page 8252
Page 4
background image

WARNING: : If the belt tensioner does not detonate at the first attempt, disconnect the detonating device from the battery and carefully check the leads
and battery.

Scrapping Side Airbags

WARNING: If the airbag does not detonate at the first attempt, disconnect the detonating device from the battery and carefully check the leads and
battery.

Parts that make up the SRS must under no circumstances be removed from one car to be used in another car.

The side airbag is to be triggered using detonating device 84 71 104 and cable assembly 86 12 343 for side airbags.

1. Park the car outdoors.

The safety distance from the car is ten meters. Nobody should be present within the safety distance.

2. Make sure that nobody is inside the car and that no loose objects are in the vicinity of the airbag.
3. Ignition switch in the OFF position.
4. Dismount the seat and rock it back and forth.
5. Take apart the 29-pin connector under the seat.
6. Connect cable assembly 86 12 343 to the connector under the seat. Re-install the seat.
7. Connect the cable assembly to detonating device 84 71 104.
8. Run the lead through the door opening and close the door. Check that all doors and windows are closed.

Procedures|Page 8254 > < Procedures|Page 8252