saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Inertia Reel With Belt Tensioner Replacement|Page 8721 > < Inertia Reel With Belt Tensioner Replacement|Page 8719
Page 1
background image

Seat Belt Tensioner: Service and Repair
Seat-Belt Tensioners

Seat-Belt Tensioners

Seat belts

The cars are equipped with seat belts for the front and rear seats in conformance with legal requirements.

For further information, see Seat belt systems.

WARNING:

^

The decal must not be removed from the seat-belt strap. No modifications or repairs may be made to the belt and no anchorage points
may be changed. Make sure that the right belt is fitted, with regard to the variant and location as specified in the spare parts literature.

^

Belts that have been subjected to stresses in connection with an accident must be removed and destroyed so that they cannot be refitted.

Seat-belt reel with triggered seat-belt tensioner

If a car has been involved in a collision that has caused the triggering of a seat-belt tensioner, the complete seat-belt reel with tensioner, belt buckle and
fittings must be changed.

If a seat belt in the rear was worn when the collision occurred, it must be removed complete with belt buckle and a new belt fitted in its place.

If no seat-belt tensioner was triggered, inspect all the belts and other equipment.

If the seat-belt tensioner was not triggered, it should be scrapped.

To remove

Inertia Reel With Belt Tensioner Replacement|Page 8721 > < Inertia Reel With Belt Tensioner Replacement|Page 8719