saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Component Locations|Page 8757 > < Component Locations|Page 8755
Page 4
background image

Driver's side:
Plug in the connectors in the door trim for the tailgate release and fuel filler cap.

5. Lift the trim in place over the lock buttons.

Fit the door trim.

6. Fit the door handle.
7. Fit the door pull.
8. Plug in the door mirror's connector and fit the trim moulding.
9. Turn on the ignition and check the SRS system and control module with the diagnostic tool as follows:

Connect the diagnostics instrument to the diagnostics socket under the dashboard. Delete any trouble codes.
Switch off the ignition and switch it on again. Wait at least 60 seconds with the ignition switched on.

Check whether a diagnostic trouble code is displayed:

Component Locations|Page 8757 > < Component Locations|Page 8755