saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Cross-Member > < Front Cross-Member Bushing|Service and Repair|Page 7029
Page 6
background image

16. Tighten the bolts securing the gearbox torque arm to the subframe.

Tightening torque 25 Nm (20 ft. lbs.).

17. Plug in the connector for the rear heated oxygen sensor, if fitted, and secure the cable at suitable place.
18. Refit the cover over the intake manifold.
19. Check the toe-in and adjust as necessary.

Rear Cross-Member > < Front Cross-Member Bushing|Service and Repair|Page 7029