9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
Ring Gear: Service and Repair
To Remove
1. Remove the final drive gear bolts using an external torx and tap off the final drive gear using a plastic hammer.
To Fit
1. Tap on the final gear wheel on the differential housing using a plastic hammer.
2. Fit the final drive gear wheel with the marking towards the differential housing. Fit the screws and tighten alternately. The gear wheel may need to
be heated slightly before fitting.
Tightening torque 20 Nm+90° (15. ft. lbs.+90°)