9-5 Wagon (9600) L4-2.3L Turbo (B235) (1999)
/l4-2.3l_turbo_(b235)/Page-1800001.png)
Transmission Speed Sensor: Service and Repair
Input Shaft Speed Sensor
To Remove
1. Remove the battery cover, battery and battery tray.
2. Disconnect the battery cable.
3. Clean the area round the sensor. Remove the sensor's retaining bolt.
4. Raise the car.
5. Remove the left-hand front wheel.
6. Gently work the sensor out of its location.
7. Unplug the connector.
Fitting
1. Connect the sensor.
2. Fit the sensor in place.
