saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Windscreen Wiper Assembly|Page 12607 > < Windscreen Wiper Assembly|Page 12605
Page 2
background image

10. Remove the motor from the bracket.

To fit

1. Fit the motor to the bracket.
2. Fit the wiper motor and tighten the screws.

3. Plug in the connector and attach the washer hose.
4. Fit the wiper arm. The mark on the rubber seal should be pointing left.
5. Check the function, wiper parking position and washer operation.
6. Fit the inner trim by inserting the clip by the door pull and fasten to the clips. Screw in the two screws in the door pull.

Windscreen Wiper Assembly|Page 12607 > < Windscreen Wiper Assembly|Page 12605