9-7X L6-4.2L (2008)
1. Install the check link assembly through the door access hole. Ensure that the position arrow is pointing forward.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the 2 check link retaining nuts to the door.
Tighten the nuts to 7 Nm (62 in. lbs.).
3. Install the rubber dust boot to the check link.
4. Install the 2 bolts that retain the check link to the pillar.
Tighten the bolts to 15 Nm (11 ft. lbs.).
5. Install the front lower window run channel. Refer to Front Side Door Window Channel Replacement (See: Front Door Window Glass/Front Door
Window Glass Weatherstrip/Service and Repair/Front Side Door Window Channel Replacement).
6. Install and fully seat the water deflector.
7. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair/Front Side Door Trim
Panel Replacement) or Rear Side Door Trim Panel Replacement (See: Rear Door/Rear Door Panel/Service and Repair/Rear Side Door Trim
Panel Replacement).
