9-7X L6-4.2L (2008)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Liftgate Window Side Reveal Molding Sealing Strip Replacement
Liftgate Window Side Reveal Molding Sealing Strip Replacement
Removal Procedure
1. Open the liftgate.
2. Release the 5 clips that retain the reveal molding to the body.
3. Peel the reveal molding away from the body and remove from the vehicle.
Installation Procedure
1. Remove the adhesive liner from the reveal molding, if applicable.
2. Position the reveal molding to the body.
3. Align the retaining clips on the reveal molding with the recesses in the body.
4. Starting at the bottom of the reveal molding, seat the molding to the body. Ensure that the retaining clips are fully seated.
5. Close the liftgate.