9-7X L6-4.2L (2008)
Drink Holders: Service and Repair
Instrument Panel Cup Holder Replacement
Removal Procedure
1. Remove the instrument panel (I/P) accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Dashboard /
Instrument Panel/Service and Repair/Instrument Panel Accessory Trim Plate Replacement).
2. Remove the screws (1) securing the cupholder (2) to the I/P.
Installation Procedure
1. Locate the cupholder (2) to the I/P.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the screws (1) securing the cupholder to the I/P.
Tighten the screws to 2 Nm (18 in. lbs.).
3. Install the I/P accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Accessory Trim Plate Replacement).