9-7X L6-4.2L (2008)
Trim Panel: Service and Repair
Body Side Window Rear Garnish Molding Replacement
Body Side Window Rear Garnish Molding Replacement
Removal Procedure
1. Remove the bolt that retains the seat belt upper anchor to the body.
2. Remove the garnish molding from the vehicle.
Installation Procedure
1. Install the garnish molding to the vehicle.
2. Install the seat belt retractor to the body.
Notice: Refer to Fastener Notice.
3. Install the bolt that retains the seat belt anchor to the body.
Tighten the anchor bolt to 70 Nm (52 ft. lbs.).
Rear Quarter Upper Trim Panel Replacement
Rear Quarter Upper Trim Panel Replacement
Removal Procedure
1. Remove the cargo shade/cover.
2. Remove the screw that retains the trim panel to the body.
3. Remove the cargo net retaining knobs.
4. Remove the bolt that retains the seat belt upper guide to the body.
5. Remove the rear upper quarter trim panel from the vehicle.
