9-7X L6-4.2L (2008)
Seat Cushion: Service and Repair
Seat Cushion Outer Trim Panel Replacement
Seat Cushion Outer Trim Panel Replacement
Removal Procedure
1. Remove the 3 seat switch bezel mounting screws. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement).
2. Remove the 3 trim panel retaining screws.
3. Remove the screws from the trim panel.
4. Remove the trim panel from the seat assembly.
Installation Procedure
1. Align the trim panel to the seat assembly.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the screws retaining the trim panel to the seat assembly.
Tighten the trim panel screws to 3 Nm (26 in. lbs.).
3. Install the 3 seat switch bezel mounting screws.
Tighten the seat switch bezel mounting screws to 3 Nm (26 ft. lbs.).