9-7X L6-4.2L (2008)
4. Install the brake pipe to the brake hose.
5. Using a backup wrench, install the rear brake pipe fitting to the brake hose.
Tighten the fitting to 25 Nm (18 ft. lbs.).
6. Install the brake pipe retaining bolt at the frame.
Tighten the bolt to 20 Nm (15 ft. lbs.).
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair/Hydraulic Brake
System Bleeding (Manual))Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair/Hydraulic Brake System
Bleeding (Pressure)).
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
9. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).