9-7X L6-4.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the park brake cable nuts to the underbody studs.
Tighten the park brake cable retaining nuts to 10 Nm (89 in. lbs.).
4. Raise the fuel tank the fuel tank.
5. Install the rear support bracket for the fuel tank.
6. Remove the pole jack and the block of wood from the fuel tank.
7. Install the park brake cable on the actuator.
8. Compress the retaining clips for the park brake cable.
9. Install the park brake retainer to the frame (left rear shown).