9-7X L6-4.2L (2008)
The bolt extractor kit EN-47702 provides the following components to assist in removal of the broken bolt segment:
1. One 5/32 inches reverse twist drill - part number EN-47702-6
2. One double-ended drill pilot insert - part number EN-47702-1 (ensures a straight drilling procedure)
3. Drill pilot inserts for larger diameter heads or main cap bolts - part number EN-47702-2 (ensure a straight drilling procedure)
4. Bolt extraction #3 EZ out - part number EN-47702-3 (after the drilling procedure)
5. Bottom tap (M11 X 2) - part number EN-47702-5 (for the head bolts to chase the threads after the completion of bolt removal)
6. Bottom tap (M10 X 1.5) - part number EN-47702-4 (for the main bolts to chase the threads after the completion of bolt removal).
Disclaimer
