9-7X L6-4.2L (2008)
10. Install the timing chain on the crankshaft sprocket. Align the dark link of the timing chain with the timing mark on to the crankshaft sprocket.
Important: It may be necessary to remove J 44221 to rotate and hold the camshaft (hex) to align the pin to the camshaft sprocket.
11. Install the intake camshaft sprocket onto the intake camshaft.
12. Install the intake camshaft sprocket washer and bolt.
13. Install the exhaust camshaft actuator into the timing chain.
14. Align the dark link of the timing chain with the timing mark on the exhaust camshaft actuator (1).
Important: It may be necessary to remove the J 44221 to rotate and hold the camshaft hex to align the pin to the camshaft sprocket.
15. Install the exhaust camshaft actuator onto the exhaust camshaft.
16. Install the exhaust camshaft actuator bolt.
*
Tighten the exhaust camshaft actuator bolt the first pass to 25 Nm (18 ft. lbs.).
*
Use J 36660-A to tighten the exhaust camshaft actuator bolt the final pass an additional 135 degrees.
17. Install the intake camshaft sprocket bolt.
*
Tighten the intake camshaft sprocket bolt the first pass to 20 Nm (15 ft lb).
*
Use J 36660-A to tighten the intake camshaft sprocket bolt the final pass an additional 100 degrees.
