9-7X L6-4.2L (2008)
10. Ensure the connectors are properly positioned in the lower fuse block.
11. Install the upper fuse block assembly to lower fuse block.
12. Connect the upper fuse block locking tabs to the lower fuse block.
13. Install the upper fuse block bolts.
Tighten the bolt to 6 Nm (53 in. lbs.).
14. Connect the wiring harness clips from fender.
15. Connect the fuse block wiring harnesses to the wiring loops.
16. Connect the wiring harness connector to the fuse block.
17. Connect the positive battery cable (4) to the fuse block.
18. Connect the negative battery cable (5) to the fender and fuse block.
19. Install the fuse block cover.
20. Install the battery tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
Notice).
21. Install the power steering hose assembly to front crossmember bracket mounting bolt.
Tighten the bolt to 10 Nm (89 in. lbs.).
22. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
23. Install the power steering cooler hose (2) to the power steering pump.
24. Install the power steering pressure hose (1) to the power steering pump.
Tighten the bolt to 25 Nm (18 ft. lbs.).
